Yamaha DHR10 700W 10 in. Powered Loudspeaker

The DHR10 is a 2-way bi-amp powered loudspeaker, equipped with a 10-inch woofer and a 1.4-inch HF driver, and perfect for use in fixed installations. Combining a 700W amplifier module and high-performance DSP with the same high-grade plywood construction found on Yamahas high-end DZR Series, the DHR10 offers best-in-class sound quality and durability.

• Featuring a plywood cabinet that delivers a clear sound with minimal vibration
• Plywood enclosure with a polyurea coating for a robust, scratch resistant surface
• Compact appearance thanks to a 10-inch LF driver that provides excellent low frequency response
• Can be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environments
• Optional UB-DXRDHR10 U-bracket allows both for vertical or horizontal use
• A pole socket for use on a stand
• Rigging points for use with eye bolts
• Proprietary FIR-X tuning, provides FIR filtering and corrective EQ, minimizing phase distortion

SPECIFICATIONS

• Speaker type 2-way, Bi-amped Powered Speaker, Bass-reflex
• Frequency range (-10dB) 52 Hz – 20 kHz
• Coverage area H90 x V60 (Rotatable)
• Crossover 1.9 kHz: FIR-X tuning (linear phase FIR filter)
• Maximum Output Level (Measured peak, IEC noise@1m) 128 dB SPL
• Components
• LF Diameter: 10″ cone, Voice Coil: 2″, Magnet: Ferrite
• HF Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite
• Amplifier class Class-D
• Power rating
• Dynamic 700 W (LF: 500 W, HF: 200 W) *
• Continuous 325 W (LF: 260 W, HF: 65 W)
• Cooling Fan cooling, 4 speeds
• Power consumption 60 W (1/8power), 18 W (Idle)
• Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
• A/D D/A Converters 24 bit 48 kHz Sampling
• Processors
• HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.
• D-CONTOUR: FOH/MAIN, MONITOR, OFF
• I/O connectors
• INPUT1: Combo x1
• INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced)
• OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
• Cabinet material Plywood
• Finish Durable Polyurea Painting, Black
• Handle Top x1
• Pole socket 35 mm x1 (Bottom)
• Rigging Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
• Floor Monitor Angle –
• Dimensions
• W 305 mm (12.0″)
• H 494 mm (19.5″) (with rubber feet)
• D 300 mm (11.8″)
• Net weight 15.0 kg (33.1 lbs)
• Options UB-DXRDHR10

* Total peak power of individual outputs (AC 120V, 25 ). This value was measured at minimum load impedance, with protection released.