TESI SWITCH EVH Style Momentary Kill Switch

Specs:

• Type: Momentary Push Button Switch
• Operation Type: Normally Open
• Housing Material: Plastic
• Mounting hole Size: 16mm
• Mounting Panel Thickness: 1mm-6mm
• Operation Pressure: about 5n
• Operation Stroke: about 3mm
• LED Rated Voltage: 6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring)
• LED Life: About 40,000 hours
• LED Power Draw: 15mA
• Contact Resistance: <50 mOhm
• Mechanical Life: 1,000,000 cycles
• Switch Rating: 3A/36VDC

What does all this mean? You’re getting a tough switch that will last a long time in your instrument and will look good doing it!

The switch is easy to install. If you have the slightest bit of skill with a soldering iron you can do it yourself. If you do not have that skill, you should have a guitar repair person do it. If you need assistance with installation check out one of ourAllparts Premium Installation Partners.

This package comes with everything:

(1) Tesi NELLI 16mm Momentary Guitar Kill Switch – This is the size used on the Wolfgang Tour Guitar.

(1) Tesi Quick-Connect wiring Bundle that includes:

• (1) Black/Black ground wire
• (1) Black/White hot wire
• (1) 9V Battery Harness with 330 Ohm resistor
• (1) On/Off Rocker Switch

When used with active pickups and/or a stereo output jack (not included) the Tesi NELLI does not require the included on/off rocker switch. Allparts recommends using stereo jack EP-0155-000 or EP-0152-000 for active installation applications.