IK Multimedia IP-IRIG-PROIO-N iRig Pro I/O Instrument/Microphone Interface for iOS Devices

Now record with any of your gear on the go, and monitor in real time with any compatible device! Thats iRig Pro I/O, the ultra-compact professional quality audio and MIDI in/out for your mobile recording life! iRig Pro I/O is the next generation of the iRig Pro the first mobile interface for connecting all of your studio gear to your iPhone, iPad, Mac, PC or Android device to play and record on the go. iRig Pro I/O is a pocket-sized full-featured audio and MIDI interface that gives you 24-bit/96kHz recording studio quality sound everywhere you go with a few additional essential features for mobile recording.

Includes:iRig Pro I/O universal Audio-MIDI interface, Lightning to Mini-DIN connection cable with charging features (60cm/23.62″), USB to Mini-DIN connection cable (60cm/23.62″), (2)2.5mm jack to MIDI cable (160cm/63″), (2)1.5V AA battery, velcro strip

Features

• High definition 24-bit/96kHz audio plus MIDI interface for iPhone, iPad, Mac, PC and Android devices
• Connects to everything, yet easily fits in your laptop bag, gig bag or pocket
• Neutrik combo input for guitar, microphone or other instruments with a professional quality preamp, phantom power and gain control
• iPhone 7 ready with integrated headphone output with volume control
• Powered via USB bus, two AA batteries or the optional iRig PSU 3A (PSU simultaneously charges iOS device)
• Detachable Lightning and USB cables included for connection to iPhone, iPad, Mac and PC (MFi certified)
• Comes with a Velcro strip to secure iRig Pro I/O to a mic stand
• Comes with over $/550 worth of full version Software & Apps
• Custom ASIO driver for superior performance on Windows machines

Specs

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V 4V
Frequency Response: 20 Hz – 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4″ Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz – 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output
Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms
Stereo Headphone Output
Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2×2.5mm TS Jack

Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power: USB bus powered when used with a computer, battery powered (2xAA included) when used with an iOS device, DC power supply (not included, iRig PSU 3A sold separately)*

Dimensions
Size: 43mm/1.69″ x 127mm/5″ x 37mm/1.46″
Weight: ~120g/4.23oz (batteries excluded)
Lightning to Mini-DIN connection cable: 60cm/23.62″
USB to Mini-DIN connection cable: 60cm/23.62″
2.5mm jack to MIDI cable: 160cm/63″

Compatibility

iOS Devices
Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation. iOS 6 or later is required.

Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
Micro-USB-OTG to Mini-DIN cable (sold separately) is required.

Computers
Mac: Mac OS X 10.6 or later. One free USB port.
Windows: One free USB port. For low latency, the IK Multimedia’s iRig audio driver must be installed.