sE Electronics DM2 TNT Active Inline Preamp

EXPLOSIVE LEVEL FOR ALL YOUR PASSIVE MICS

A new avenue of precision on stage and in the studio for your precious go-to dynamic & passive ribbon microphones! At the flick of a switch, the DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to find the sweet spot of your favorite passive mics.

FEATURES

• Recommended for use with dynamic & passive ribbon microphones
• Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
• Eight load settings ranging from 50 ohms to stunningly high 10 mega ohms to precisely match any mic
• Sophisticated class-A design and specially-selected high-grade FETs for a signal boost without coloration
• Vastly lower output impedance and nearly half the noise of anything else on the market to raise any mic level with clarity
• All-metal housing and premium finish ensures the DM2 can handle demanding on-tour or recording/broadcast studio lifestyles
• Gold plated XLR connector for loss-free reliable signal connection

SPECIFICATIONS

Power

• Electrical Impedance: 135 Ohms
• Recommended Load Impedance: >1K Ohms
• Connectivity: 3-pin male/female XLR connector
• Powering: 48V Phantom Power (P48 according to IEC 61938)

Sound

• Frequency range: 10 Hz – 120 kHz (-0.3 dB)
• Gain: 15 dB / 30 dB
• Current consumption: 3.1 mA
• Max output level (0.5% THD): 9.5 dBV (3.0 V)
• Output noise level: 1 V @ 15 dB / 6.6 V @ 30 dB

Dimensions

• Preamp diameter: 19 mm (0.75 in.)
• Preamp length: 96 mm (3.78 in.)
• Preamp weight: 80 g (2.82 oz.)

What’s in the box

• DM2
• sE Logo Sticker
• User manual with warranty card