Powerwerks PW3X6BT 3-Channel PA Tower w/ Bluetooth 2-Band EQ – 300-Watt

The PW3X6BT is designed for the performer seeking a convenient, portable sound system with uncompromised power and performance.

These towers have a 3 channel mixer and amplifier built into the back of the cabinet. The straight forward control panel is easy to navigate even for the novice. Three input channels with mic, line, aux and Bluetooth inputs add convenience and flexibility to your live set up. Independent volume controls on each channel and a master control allow you to adjust levels with precision. These controls allow you to bring your sound into focus on each track. The subwoofer out jack allows bands and DJs to enhance their low end performance by adding a powered sub.

The system equalization is inspired by the natural response of studio monitors and is tailored to be pleasing to the ears over hours of listening. With the Hi and Low controls set at 12 oclock, each channel responds with unaltered, studio-accurate precision. Three 6 woofers and a high frequency neodymium compression driver give demanding performers the low frequencies they need while retaining rich and detailed mid-range and crystal clear high frequencies.

BLUETOOTH: The Aux / Bluetooth channel makes wireless pairing possible for any Bluetooth device and is perfect for streaming audio. Non-Bluetooth devices can connect directly to the PW3X6BT using the 3.5mm Aux Input jack.

POWERLINK & POWERBANK: Powerkwerks own Powerlink circuit provides all the flexibility youll need for a variety of events and venues. Connect a standard XLR microphone cable to the Powerlink Out jack on your PW3X6BT and your tracks combine and can be played through the Powerlink In jack of another Powerwerks PW model. The Power Bank is a convenient feature for the gigging musician. Two USB jacks can be used to charge or power phones, tablets, digital recorders and other USB devices.

24-BIT DIGITAL SIGNAL PROCESSING: The PW3X6BT also comes loaded with a bank of four digital effects, to add extra sparkle to your live performance. Use the push button to select between the Room Reverb, Hall Reverb, Chorus+Reverb and Delay+Reverb and effects level knobs to blend the effects into each channel.

FEATURES

• Built-In 3 Channel Powered Mixer
• 24-bit Digital Signal Processing
• Bluetooth Connectivity
• Powerlink Circuit for system expansion
• Powerbank for USB power and charging
• POWERLINK for Ease of Input Expansion

SPECIFICATIONS

• Peak Output Power: 300 Watts
• Accepted Inputs:
  • CH1 and CH2: Mic XLR balanced, Line level 1/4 unbalanced
  • CH3: 1/8″ Line Level or Bluetooth Device
• Hum:
  • +49dB: Mic to Speaker Output (CH1 & CH2)
  • +37dB: Nominal System Noise, all level controls at 50%
• System Gain/Speaker Output (Measurements made at 1kHz):
  • +49dB: Mic to Speaker Output (CH1 & CH2)
  • +35dB: Line to Speaker Output (Ch1 & CH2)
  • +25dB: Aux In to Speaker Output
• Channel EQ (High, Low): 4kHz and above, 800Hz and below
• Powerlink (IN and OUT): Both jacks accept a balanced input and sends a pre-master volume output mix of channels. Recommended use: Linking two Powerwerks models
• Subwoofer Out – Line Out: 20Hz-150Hz
• Monitor Out – Line Out: Balanced TRS Output with grounded sleeve
• Phantom Power: +15V, Mic Input (CH1 & CH2)
• Power Requirements (USA/CANADA): 120VAC/60Hz Nominal
• Speakers: Three 6″, 8 ohm each
• Horn: 1″ Neodymium Compression Driver
• Nominal Impedance: Not Designed for external speakers
• Bluetooth Module Features: Bluetooth 3.0EDR compliant. Typical +2dBm Class 2 output power. Audio DAC:94dB SNR. A2DP profile support.
• Dimensions: 9.5″ D x 8″ W x 28.75″ H / 240mm D x 205mm W x 730mm H
• Weight: 29 lbs / 13.15kg