Audio-Technica – ATM350D Cardioid Condenser Instrument Microphone w/ Drum Mounting System

Designed for use with drums, the ATM350D UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.

When teamed with the included AT8491D drum mount and strong, flexible AT8490 5″ gooseneck, the mic can be securely fastened to the drum and positioned to stay where you want it. The drum mounts unique spring-loaded mechanism clamps it tightly to a drum lug (without hindering your ability to adjust the lug) and provides excellent shock resistance for the mic; the goosenecks rigidity ensures that it wont flop around no matter how aggressively you play. The microphones cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with a hook-and-loop fastener and a protective carrying case.

FEATURES

• Low-profile mic design for minimum visibilityCrisp, clear, well-balanced microphone response, even at high SPLs
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• UniMount drum mount with a unique spring-loaded mechanism attaches securely to a drum lug and provides excellent shock resistance for the microphone
• Rugged UniMount 5″ gooseneck rigidly holds its shape, keeping the microphone accurately positioned even during aggressive play
• The in-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
• Interchangeable elements available for hypercardioid and omnidirectional polar patterns
• Included violin mount with hook-and-loop fastener provides an additional mounting option

SPECS

Microphones Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Cardioid Frequency Response 40 20,000 Hz Low Frequency Roll Off 80 Hz, 12 dB/octave Open Circuit Sensitivity 49 dB (3.5 mV) re 1V at 1 Pa Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range 130 dB, 1 kHz at Max SPL Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa Phantom Power Requirements 11 52V DC, 3.5 mA typical Switches Flat, roll-off Weight (Microphone) 14.5 g (0.5 oz) Weight (Power Module) 90 g (3.2 oz) Weight Microphone: 14.5 g (0.5 oz)
Powermodule: 90 g (3.2 oz) Cable 4.0 m (13.1′) long (permanently attached to microphone), 3.2 mm (0.13″) diameter, 2-conductor shielded cable with HIROSE HR10-type connector Dimensions Microphone:
37.8 mm (1.49”) long,
12.2 mm (0.48”) maximum body diameter

Powermodule:
92 mm (3.62″) long,
18.9 mm (0.74″) diameter Dimensions (Power Module) 92 mm (3.62″) long,
18.9 mm (0.74″) diameter Dimensions (Microphone) 37.8 mm (1.49”) long,
12.2 mm (0.48”) maximum body diameter Output Connector (Power Module) Integral 3-pin XLRM-type Output Connector Powermodule:
Integral 3-pin XLRM-type Optional Interchangeable Elements UE-H hypercardioid (100);
UE-O omnidirectional (360) Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491D UniMount drum mount; AT8490 UniMount 5″ gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case Audio-Technica Case Style M36